Angel Clothes Pin 

Clothes Pin Angels

Thanks to Suzanne "D" for this Craft 

This craft can be done with a hot glue gun or with Elmer’s glue. The hot glue gun will set the pieces quicker but if the children 

Materials: 

1 Small Baby Clothes Pin (available from most craft supply stores)

2 Medium Tear Drop wooden shapes OR 1 medium heart shaped wood

1 Yellow circle about the size of a penny

1 pipe cleaner 2 ½ inches long

1 pipe cleaner 1 inch long

3 small pieces of lace cut into triangular shapes

Directions:

1. Draw two eyes and a mouth on the top of the clothes pin.

2. Bend the tips of the pipe cleaner into small hands &ldots; a pair of flat tweezers is good for this

3. Wrap the pipe cleaner around the body of the pin just above the legs (the pins I’m using have a natural spot for this

4. Glue the pipe cleaner to the clothes pin.

5. If you use tear drops, position the tear drops so that they form wings by placing the two points together and glue them. Skip this step if you are using hearts

6. Take the yellow circle and glue it to the back of the clothes pin at the top to form a halo

7. Now glue the clothes pin to the teardrop shapes or the heart so that they form wings.

8. Once the glue has dried, take the lace pieces and glue them to the legs to form a three layer skirt

9. Take the 1 inch pipe cleaner and form a small circle at one end. Glue this to the back to form a hanger. 

And here's the finished craft ... about 3 inches in length note though that the arms are a bit flatter because of the scanner.: